Atlant-8 - the multichannel synchronous recorder and analyzer of vibrosignals
The
multichannel synchronous recorder and analyzer of vibrosignals the Atlant
- 8 is the modern device intended for solution most complex problems in
vibration diagnostics of equipment. A basis of the vibration analyzer
the Atlant is a transportable computer such as laptop combines functions
of registration signals, data handling and storage. Functions of initial
processing of vibrosignals, filtering and the synchronous digital conversion
are realized in the external block. Vibration sensors and the phase marker
used at balancing are connected to this block. Using of a computer for
signal processing removes practically all limitations of usual portable
instruments of a vibrocontrol. It is small quantity of input channels,
the low speed performance, the limited memory data. Possibility of carrying
out of continuous signals registration during tens seconds or minutes
allows to use such instruments for registration of transients in equipment,
for control of vibrating processes in low speed gears, etc.
Techincal specifications
| Number of channels of registration of analog signals | 8,16,32 |
| Frequency of registration of signals, Hz | 5 - 20000 |
| Frequency range of delivered vibration sensors, Hz | 5 - 5000 |
| Duration of samplings of signals | 0,01 sec - 30 minutes |
| Lines in frequency spectrum | 100 - 3200 |
| Operating time from internal sources of power supply, hours | 2,5 - 4,0 |
| Device weight , kg | 5,0 |
Device Atlant-8 is issued only in common industrial version. Usage of the device in explosion-hazard rooms is prohibited.
The Atlant includes software set of vibrating diagnostics in equipment. By means of the software the Atlant it is one can analyze waveforms and spectrum of vibrosignals, a wavelet - conversions of signals. Available software of space visualization of multivariate oscillations can bring the big advantage at diagnostics.
Available systems of vibrating diagnostics are included in software:
- the automated system of diagnostics of technical state and search of defects of rotating equipment by spectrum of vibrosignals;
- the language of writing diagnostic rules by means of which the user can use all own diagnostic operational bases;
- the system of early diagnostics of defects of a status and mounting (assembling) of rolling bearing on spectrum of an envelope of a vibrosignal;
- system for balancing and damping of rotors in internal bearings - up to 14 planes of correction and 42 points of a control.
Upgrade of the software is made by us during all time of life of the device by e-mail or on a CD-ROM.